Natural (color) Press On's: How to Paint (color), Prime, Print & Seal on Natural Press-On'sUpdated 3 years ago

Here is how to Paint (color), Prime, Print, and Seal on Press-On's.

1. APPLY NAIL

- Following the directions on your Press-On Nail Box, apply your press-on to your nails.

2. PAINT NAIL

- Apply one layer of colored polish to your Press-On

- If needed, apply a second layer of colored polish to your Press On

3. PRIME NAIL

- Open Primer and gently wipe off excess primer from the brush - Only a minimal amount of primer is needed on the nail for printing.

- Apply one thin layer of primer over the nail bed making sure to cover the whole nail

- Primer will dry to a chalky white matte finish.

• - Primer should dry in about 2 minutes. - Primer takes longer to dry on Press-On Nails than natural nails.

4. NAILBOT

- Insert your finger into the Nailbot and rest on the Finger Cradle

- Print your selected Nailbot design

• - If you are unhappy with your print, you can remove your design with an alcohol wipe, reprime, and reprint

5. SEAL NAIL 

- Apply one layer of top coat over the whole nail bed to lock in your print.

- Apply a second layer of top coat over the colored polish to ensure all primer has disappeared.

- Your nails are now ready to be shown off!